loading

508 results for found: utilisé Reflow Ovens

1 2 3 4 5 6 Prochain
  • ABW SYSTEMS / MANIX: TSC-1008

    ABW SYSTEMS / MANIX TSC-1008 Reflow ovens 3 Phase, 240 VAC Currently installed.
  • ABW SYSTEMS / MANIX: TSC-1008

    ABW SYSTEMS / MANIX TSC-1008 Reflow ovens 3 Phase, 240 VAC Currently installed.
  • ADVANCED TECHNIQUES / ATCO: PRO 1600

    Description: ADVANCED TECHNIQUES / ATCO: PRO 1600 Forced convection reflow oven 120/208 VAC, 50A, 50 Hz, 3 phase 2008 vintage.
  • ADVANCED TECHNIQUES / ATCO: PRO 1600

    ADVANCED TECHNIQUES / ATCO PRO 1600 Forced convection reflow oven 120/208 VAC, 50A, 50 Hz, 3 phase 2008 vintage.
  • ADVANTEST: PRO 1600-EXN

    ADVANTEST Pro 1600-EXN Reflow oven Temperature: Up to 375° Celsius Reflow area: 20" x 20"/ 508mm x 508mm Topside clearance: 4"/101mm Programmable heating zones: 10 Heating type: Full forced air or nitrogen convection Interior: Stainless steel Air requirements: 80- 100 PSI@0.3 CFM Power requirements: 120/208 VAC 3 Phase 50 Amp 50/60 Hz Peak power consumption: 16 kW (during ramp up stages of a profile) Operating consumption: 9 kW (during reflow) Full convection: Yes Lead free compatible: Yes (10) Heating zones: Yes (2) Cooling zones: Yes Footprint of 31" x 31": Yes Computer control: Yes Software package: Yes Library with (50) profiles: Yes Exhaust / fume cleaning: Yes Nitorgen reflow capable: Yes Notebook PC: Yes.
  • APS: -

    APS - Benchtop reflow oven (3) Zones.
  • APS NOVASTAR: GF 120

    APS NOVASTAR GF 120 HC / HT Reflow oven.
  • BTU: PYRAMAX 150

    BTU Pyramax 150 Lead-free reflow oven 24" wide board capacity Wire mesh and edge rail 2005 vintage.
  • BTU: PYRAMAX 125A

    BTU Pyramax 125A Reflow oven (10) Zone top / bottom heat (2) Cooling zones Edge rail Mesh conveyor Left to right 208 V 2010 vintage.
  • BTU: PYRAMAX 150

    BTU Pyramax 150 Reflow oven (10) Zones 2006 vintage.
  • BTU: PYRAMAX 98N

    BTU Pyramax 98N Reflow soldering machine Maximum temperature rating: 350 °C Nominal operating temperature: 80 - 325°C Number of controlled heated zones: (7) Top / Bottom Heater: BTU Porcupine ii Heater zone 5kw: Zone 1,2,6,7 Heater zone 2.7kw: Zone 3,4,5 Total heated length: 2489 mm Blower accuracy: (5) Degree celcius Total cooling length: 711 mm Oven atmosphere: Air / N2 Gas distribution system: Point 1: Entrance curtain top / bottom Point 2: Zone 1 top/bottom Point 3: Zone 4 and 5 top / bottom Point 4: Zone 6 and 7 top / bottom Point 5: Cooling zone Point 6: Exit curtain top / bottom N2 Feeding zone: Entrance, 1,4&5,6&7, cooling, exit O2 Ppm measurement (zone): 1,7 2006 vintage.
  • BTU: PYRAMAX 125A

    BTU Pyramax 125A Air reflow oven (10) Zones / (2) Cooling zones Fine mesh conveyor belt Edge rail-left to right, front rail fixed (standard configuration) Closed loop blower speed control Heated tunnel length: 125" Cooling length, 48" Maximum temperature: 350ºC Forced impingement convection Programmable heating and cooling rates Side to side gas recirculation Low nitrogen and power consumption Flexible platform configuration Automatic width adjust Dynamic gas Idle Smart product tracking Electronic over-temperature safety system Power: 480 V, 3 Phase,78 kVA 2011 vintage.
  • BTU: PYRAMAX 98

    BTU Pyramax 98 Reflow oven Set up for nitrogen 2007 vintage.
  • BTU: PYRAMAX 150

    BTU Pyramax 150 Reflow oven (10) Heating zones (2) Cooling zones Mash conveyor Chiller unit.
  • BTU: PYRAMAX 100A

    BTU Pyramax 100A Air reflow oven Zones: (8) Heating zones (1) Cooling zone Conveyor type: Chain + Mesh Flow direction: Left to right Front rail fixing 2010 vintage.
  • BTU: PYRAMAX 150NZ12

    BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB Tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Left to right PCB Width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2016 vintage.
  • BTU: PYRAMAX 150NZ12

    BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB Tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Right to left PCB Width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2012 vintage.
  • BTU: PYRAMAX 150NZ12

    BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Left to right PCB width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2015 vintage.
  • BTU: PYRAMAX 98N

    BTU Pyramax 98N Reflow oven Flow: Left to right Rail front fix Edge rail & fine mesh belt (7) Heat zones Cooling zone 2005 vintage.
Montrer par page
1 2 3 4 5 6 Prochain